VAC - S50 & S50B32 (Euro) Multi Layered Steel Head Gaskets (MLS)

Purchase VAC - S50 & S50B32 (Euro) Multi Layered Steel Head Gaskets (MLS)

Our S50 Euro Multi Layered Steel Head Gasket is made with an 86mm or 87mm bore for compatibility with almost every build, and is designed to withstand much higher combustion pressures than the factory head gasket and other conventional or modified head gaskets.
These gaskets will fit all S50B30 & S50B32 Euro Engines if appropriate bore size is ordered

Made to the finest specifications and run all around the world on the street and in various motorsports; they are made from a minimum of 5 layers of which the outer layers are coated with a patented type of material to ensure proper sealing of fluids. This design ensures a complete combustion chamber seal and elimination of failure due to weak factory gaskets blowing out under boost or high performance use.
These gaskets are available on a variety of thickness' from as thin as .024" up to .140".
We use these on every performance engine we build.

This gasket is a great way to change compression slightly up or down without having to buy new pistons.

PLEASE SPECIFY if other than stock thickness is required.

Chose an off the shelf gasket, or select a thickness and bore and we will make it for you! Call or email if you have any questions .070 is the standard and most common size ordered.

VAC Tech Note:
To ensure the best results, we strongly recommend the use of ARP studs when fastening the head to the block. Also, resurfacing the head by a machine shop is highly recommended.

Fits S50 & S52 Euro engines.

Purchase VAC - S50 & S50B32 (Euro) Multi Layered Steel Head Gaskets (MLS)

• SKU: VAC-HG-S50E
• Bore Size: 86mm; 87mm; Custom (Type in below)
• Thickness (in.): .070; .080; .120; .140; Custom (Type in below)
• Engine Type: S50 Euro

Other products in the category Engine Components / Cylinder Head Gaskets (MLS Type):

• VAC - M10 Multi Layered Steel Head Gaskets (MLS)

• VAC - M20 Multi Layered Steel Head Gaskets (MLS)

• VAC - M30 Multi Layered Steel Head Gaskets (MLS)

• VAC - M42/M44 Multi Layered Steel Head Gaskets (MLS)

• VAC - M50 / M52 Multi Layered Steel Head Gaskets (MLS)

• VAC - M52tu / M54 Multi Layered Steel Head Gaskets (MLS)

• VAC - S38 Multi Layered Steel Head Gaskets (MLS)

• VAC - S50 & S50B32 (Euro) Multi Layered Steel Head Gaskets (MLS)

• VAC - S50 / S52 (US) Multi Layered Steel Head Gaskets (MLS)

• VAC - S54 Multi Layered Steel Head Gaskets (MLS)