VAC - Premium Manual Turbo Boost Controller

Purchase VAC - Premium Manual Turbo Boost Controller

Accurate, Simple, Easy.

Chances are, your BMW didn't come turbocharged, so we have taken extra steps to insure this MBC is super accurate with a special valve design that eliminates boost spikes caused by slow valve designs, because 1 or 2PSI could be the difference between a killer ride and a killed motor...
Our MBC allows you to adjust your PSI whenever the mood suits and has a very smooth adjustment so you can make accurate increments as small as half pound (.5 PSI) easily.
Billet adjustment wheel allows hand adjustment, but will not loosen under high heat or harsh vibration when pressure is set.

Our fast acting valve lets your turbo spool quicker by fully isolating the waste gate until pressure is reached, then reacting nearly instantaneously due to its low mass. All electronic solenoid controlled types (Electronic Boost Controllers) must wait to get a signal from the boost sensor, process, then react by actuating the solenoid. This is slow, and it has been proven many times that this MBC outperforms both other MBCs and Electronic Controllers.
Other unique features includes is it's compatibility with the lower boost levels many turbo BMWs see Vs. nearly all other boost controllers that do not allow boost control below 15PSI*.

Features:
• Anti-Spike Features
• Machined out of Billet Aluminum and Stainless Steel
• Ceramic Ball-Bearing Valve Construction
• Super Fast Spool-up
• Wide Range of Boost Control from as little as +2 PSI to over 20PSI.
• Anodized Finish Resists Corrosion and Elements
• Easy Hand-adjustment Without Tools
• Industry Leading Accuracy
• Unaffected by Weather
• Beautiful Anodized Finish & machining
  Includes:
  • MBC
  • Mounting Bracket
  • Low Boost Spring
  • High Boost Spring
  • Hardware
  • 3ft Length of Vacuum Hose
  • Installation Instructions

    NOTE: **Product will vary from image shown**

VAC Tech Note
Regardless of brand or type, a boost controller will only allow you to raise boost above the installed wastegate spring pressure. If you wish to lower boost level, you must run a lighter wastegate actuator spring. If your having boost spike/creep cause by exhaust related issues, no boost controller will fix this.

Purchase VAC - Premium Manual Turbo Boost Controller

• SKU: VAC-MBC
• Engine Type: Universal for nearly any turbo vehicle

Other products in the category Forced Induction (Turbo, Supercharge, Accessories) / F/I Accessorys & Electronics:

• AEM - Tru-Boost Controller & Gauge

• AEM - Water / Methanol Failsafe & Flow Gauge

• AEM - Water/Methanol Injection Filter

• AEM - Water/Methanol Injection System - 1 Gallon

• AEM - Water/Methanol Injection System - 5 Gallon

• ATP - Mini Cooper S (Turbo) Vacuum Block