VAC - M50/ M52/ M52TU/ M54 /S50 (US) /S52 (US) Performance Coated Main Bearing Set

Purchase VAC - M50/ M52/ M52TU/ M54 /S50 (US) /S52 (US) Performance Coated Main Bearing Set

Our VAC Bearing Sets are specially constructed and coated to reduce friction to a minimum; enabling lower temps and faster revolutions in your expensive BMW engine.

All our coated bearings are thermal breakdown resistant, helping to prevent premature engine failures under stress when things are most critical. Not only that, but these bearings can last much longer than any normal bearing set in either a street engine, or race engine.
Our VAC bearings are used in all our highest performance BMW engine builds.

Our bearing sets have become a favorite product of all our race and engine building customers around the globe who have reported unparalleled wear characteristics under all conditions:
They have excelent anti-wear properties, as well as resilance for emergency loss of lubrication senarios, helping if you experence a failure when racing.
They also have a high embedibility factor, so cold starting, or contaminents in oil are less likely to score the crankshaft.

Made for us by the same company who manufactures for the US military, NASCAR & ALMS teams, and other customers that require "mission critical" quality.
Used by by both the 1st and 2nd fastest BMW drag cars in the USA, as well as our Racing & Endurance customers around the world. Proven by customers to help you finish the race even with loss of oil pressure! If you are looking for high performance rod bearings, this is the set for your M5x/S5x. Truly the best avalible.

VAC Tech Notes:


• As with all performance bearings, please check your tolerances and size as required before installation. Due to the specialize tools needed, professional install is required.
• There are no returns available on any engine bearings.

Purchase VAC - M50/ M52/ M52TU/ M54 /S50 (US) /S52 (US) Performance Coated Main Bearing Set

• SKU: VAC-HPMBS-M50
• Engine Code: M50; M52; M52 TU; M54; S50 (US); S52 (US)
• Size: Std. Crank; .25mm Undersized Crank

Other products in the category Engine Components / Bearings:

• VAC - M42 / M44 Performance Coated Main Bearing Set

• VAC - S14 Performance Coated Main Bearing Set, E30 M3

• VAC - S38 Performance Coated Main Bearing Set

• VAC - M10 Performance Coated Rod Bearing Set

• VAC - M20 Performance Coated Main Bearing Set

• VAC - M20 Performance Coated Rod Bearing Set

• VAC - M30 Performance Coated Rod Bearing Set

• VAC - M42 / M44 Performance Coated Rod Bearing Set

• VAC - M50/ M52/ M52TU/ M54 /S50 (US) /S52 (US) Performance Coated Main Bearing Set

• VAC - M50/M52/M52TU/M54/S50 (US) /S52 (US) Performance Coated Rod Bearing Set

• VAC - M50/M52/M52TU/M54/S50 (US) /S52 (US) Race (non-coated) Rod Bearing Set

• VAC - M60/M62 & S62 Performance Coated Main Bearing Set

• VAC - M60/M62 Performance Coated Rod Bearing Set

• VAC - N54/N55 Performance Coated Rod Bearing Set

• VAC - S14 Performance Coated Rod Bearing Set, E30 M3

• VAC - S38 Performance Coated Rod Bearing Set

• VAC - S50B30 Euro / S50B32 Euro Performance Coated Main Bearing Set

• VAC - S50B30 Euro Performance Coated Rod Bearing Set

• VAC - S50B32 Euro, Performance Coated Rod Bearing Set

• VAC - S54 Performance Coated Main Bearing Set

• VAC - S54 Performance Coated Rod Bearing Set

• VAC - S62 Performance Coated Rod Bearing Set