VAC - (E30 / M20) Clutch and Flywheel Combos

~~930.00~~ 759.95

Purchase VAC - (E30 / M20) Clutch and Flywheel Combos

Proven Clutch and Flywheel Combos from VAC

This kit combines an excellent JB Racing flywheel and either an OEM or ClutchMasters clutch package for a no compromise solution for your BMW. These proven packages fit the bill and are made to perform; 30 years of clutch manufacturing excellence and development is at work for you.

Some of the benefits of this kit include:

Combo pricing on quality products for high value
Excelent power holding and longevity
Sprung hub design to reduce transmission / clutch chatter normally associated with light weight setups
Faster shifting and easier rev matching
A faster revving engine, getting more power to the ground

JB Racing Flywheel:

JB Racing is the manufacture of some of the finest flywheels around; used by many professional race teams to do precision machining for engines and other driveline components. Their BMW flywheels are made with the same precision and quality that our customers and teams rely on.
This flywheel weighs only 8 lbs, but thanks to the inline 6 smooth torque, it can be used on the track or street.

CNC machined flywheel zero-balanced to eliminate vibration

Replaceable hardened steel clutch surface, bolted - not riveted on

Heli-coil inserts for pressure plate don't strip when clutch is replaced

Factory starter ring gear

Hardened steel gaul plate keeps the flywheel bolts from damaging flywheel

Addresses several concerns common to both street and track driven cars.

Flywheel bolts, pressure plate bolts, and dowel pins included

Clutchmasters Clutch:

Disc: By adding a sprung hub disc, chatter and noise gained by adding a lightweight flywheel is greatly reduced or nearly eliminated. Depending on your car's use, we offer five performance options to match your needs:

ClutchMasters FX100 - Performance Organic - Perfect replacement for stock and mild bolt ons (40% higher holding capacity, excellent for street and light track use)

ClutchMasters FX200 - Kevlar - 70% higher capacity w/ smooth engagement, great for a M20 with internal work, long hard-use lifespan(2-3 times stock)

ClutchMasters FX300 - Segmented Kevlar - A FAVORITE for turbo cars, segmented Kevlar surface has more bite, 110% higher capacity, long life yet still impressively smooth. A great performer.

ClutchMasters FX400 - Ceramic - hard use compound, gives up more smoothness for lots of additional power handling capability - great for track use. Also aggressively built turbo / extreme street cars that need maximum holding.

ClutchMasters FX500 - Sintered Ceram-iron - Full race use only, non-sprung on/off style puck clutch.

Pressure Plate: ClutchMasters increase the clamping force on the pressure plate by changing the lever action which adds a minimal amount of pedal stiffness compared to other methods. Also, they replace the straps with beefier pieces and add an additional layer for good measure; this has proven to be the Achille's heel on most pressure plates (as we have found with other clutches) and is a must for cars that will receive any extended hard use.

All kits include JB Racing aluminum lightweight flywheel, clutch disc / pressure plate stage of choice, plus needed bearing/s.

As a combination, these kits fit:

12/1986-on E30 325i /325is

8/1987-on 325ix.

Purchase VAC - (E30 / M20) Clutch and Flywheel Combos

SKU: VAC-C&FC-E30-6
Clutch + Flywheel Package: CM FX100 +JBR; CM FX200 +JBR; CM FX300 +JBR; CM FX400 [6 puck] +JBR; CM FX400 [4 puck] +JBR (most aggressive); CM FX500 [4 puck] + JBR, Race ONLY (on/off engage)
Engine Type: M20
Chassis Type: E30 325i, 325ix (89-on)

Other products in the category Drivetrain / Clutch & Flywheel Combo Kits (Direct Replacement):

VAC - E30 M3 Clutch and Flywheel Combos

VAC - M50 / M52, S50 /S52 Clutch and Flywheel Combos (E36 / Z3 '92-00)

VAC - Performance Clutch Delay Valve

BMW HIGH PERFORMANCE

VAC - (E30 / M20) Clutch and Flywheel Combos

Proven Clutch and Flywheel Combos from VAC