Miller - M20, ProStreet Induction Kit

Purchase Miller - M20, ProStreet Induction Kit

The ultimate breath of fresh air!

The stock intake tract has a few restriction points, by increasing the diameter of the intake tract, and removing the stock air box, these restrictions are removed and allows the engine to breathe much better - giving you MORE POWER!
The ProStreet Induction Kit is a real cold-air induction, increasing your intake tract from the cumbersome and turbulent OEM configuration, with 2.5" diameter- to a smooth 3.0" diameter mandrel bent pipe reducing all major restrictions associated with the stock equipment.

But wait! The Miller ProStreet Induction kit is more than just a cold air intake...
The Miller ProStreet M20 Induction Kit incorporates the Plug and Play GEN-3 MAF sensor conversion right into the tubing giving it a nice clean look and ultimate performance. No more finicky 'barn door style' AFM with a square hole for the intake! This is a huge limiting factor in M20 performance... gone... Replaced with a much better MAF sensor.

This product is really 3 products in 1: a cold air intake, a performance chip, and an AFM conversion!

Each Prostreet Kit has provisions for the factory Idle Control Valve in the correct location. The PSIK also eliminates a ton of weight from the factory intake system- compared to stock.

Application:
-E30 325i (all)

*Note* While these may work on 2.7e motors, there is no software available. Custom tuning would be required.

Includes

• Miller ProStreet Cold Air Intake
• Rubber coupler with I.C.V. port
• ProStreet Induction Software / Chip
• PnP GEN3 MAF sensor
• Aluminum Splash Shield
• High-flow Cone Filter

   

  WHEN ORDERING, PLEASE SELECT the above options:
  
  • The throttle Body to be used?
  • If you have a stock style exhaust, or upgraded high flow ?
  • If you want to add custom programmability with a Miller WAR Chip?

-If you have lots of mods, or plan to add mods like exhaust, cams, head work... etc; we recommend upgrading to the WAR Chip
-If upgrading to Miller WAR Chip, software is downloaded directly from their website and not included in the box so you always have the newest, and most stable version.

Purchase Miller - M20, ProStreet Induction Kit

• SKU: MIL-PSIK-M20
• Throttle Body: M20 Throttle Body; M30 Throttle Body
• Exhaust Type: Stock style; Aftermarket High Performance
• Engine Type: Nearly any BMW with an M20

Other products in the category Intake / Cold Air Intakes:

• AA - E39 M5 Cold Ram Air Intake Kit

• aFe - Dynamic Air Scoop 'DAS' (135 / 335 / M3)

• aFe - Performance Air Intake Kits for BMW 1 Series

• aFe - Performance Air Intake Kits for BMW 3 Series & M3

• aFe - Performance Air Intake Kits for BMW 5, 6 7 Series, X3 / X5 & Z series

• aFe - Performance Air Intake Kits for MINI

• BMW - E30 M3 Evo Airbox Kit

• VAC - "Dominator" E36 Air Intake Kit

• VF - Performance Air Intake, E46 M3