CP Pistons - S54 Forged Piston Kit (For Stroker Cranks)

Purchase CP Pistons - S54 Forged Piston Kit (For Stroker Cranks)

Our 97mm Stroker Crank Forged Piston Sets by CP set the standard in S54 performance.

These are the same pistons we use in our winning race and high performance S54 stroker builds for customers around the world.
Afer many years of working closely with CP, these pistons continue to meet the highest level of expectation: Winning. The finest available; others agree- you can find these same pistons in most of the worlds most powerful N/A and Turbo builds. For extremely high stress applications, such as forced induction, or high-revving strokers. We recommend checking the Heavy Duty Pin option.

Typical stocked compression ratios are 11.5, 12.5, and 13:1. Pistons sets are stocked @ 87.5mm bore
Custom bore of 87.2mm is also available, other C/R are as well, these orders carry a small custom fee (+$50)
Many pistons look alike, however; our CP Pistons use spot on clearances, specification, dimensions, and metallurgy that are specifically engineered to perfect compatibility with each BMW application and engine technology.
 

• Made from the best forgings available for uncompromising reliability and performance.
• Made to the most accurate tolerances.
• Exotic specs and coatings available to give you the winning edge
• Sold in matched and balanced sets of 6.
• Supplied with ultra high quality ring set, lightweight pins, and locks.

Please specify compression ratio when ordering above...
Don't see what you need or have a question? Give us a call or email and we can help with any custom kit need.

• In the event you need to rush a set of custom pistons, we can supply you with applications quickly: Expedited production services are available for applications not in stock; 2-3 week ($200) 1-2 week ($300) or 3 Day ($500). Please place a request at the end of your order in the notes section if you would like this service. You won't be charged if your application is in stock.

VAC Motorsports is a full engine and machine shop and can provide any machining or building services required for mild street to full race build. Email or give us a call!
VAC Motorsports is the master distributor for all CP Pistons BMW applications.

Purchase CP Pistons - S54 Forged Piston Kit (For Stroker Cranks)

• SKU: CP-FPS-S54-S
• Compression Ratio: 11.5:1 Stock C/R (Pump gas/bolt on Supercharger); 12.5:1 (Race Gas Only); 13:1 (Race Gas Only); 9.5:1 (Turbo/ High Boost Supercharged); Custom (Fill in box)
• Engine Type: S54b32

Other products in the category Engine Components / Pistons & Rings:

• CP Forged - M60 / M62 / M62tu BMW Piston Set

• CP Pistons - S14 Forged Piston Kits (2.3Liter Crank)

• CP Pistons - Heavy Duty Piston Pins -- CP Heavy Duty Piston Pin

• CP Pistons - M10 Forged Piston Sets

• CP Pistons - M20 Forged Piston Sets

• CP Pistons - M20 Forged Piston Sets (for 2.7L / 81mm Stroker Crank)

• CP Pistons - M30 Forged Piston Kits

• CP Pistons - M42 Forged Piston Kits

• CP Pistons - M44 Forged Piston Kits

• CP Pistons - M50 Forged Piston Kit

• CP Pistons - M52 Forged Piston Kits

• CP Pistons - M52tu Forged Piston Kits

• CP Pistons - M54 Forged Piston Kit

• CP Pistons - N54 Forged Piston Kit

• CP Pistons - S14 Forged Piston Kit (2.5 Liter crank)

• CP Pistons - S38 Piston Kit (3.5, 3.6 & 3.8 L)

• CP Pistons - S50 (US) Forged Piston Kit

• CP Pistons - S50b30 (Euro) Forged Piston Kit

• CP Pistons - S50b32 (Euro) Forged Piston Kit

• CP Pistons - S52 (US) Forged Piston Kit

• CP Pistons - S54 Forged Piston Kit

• CP Pistons - S54 Forged Piston Kit (For Stroker Cranks)

• CP Pistons - S62 Forged Piston Set

• CP Pistons - S85 Forged Piston Set

• CP Pistons - Spec E30 Forged Piston Sets

• Mahle Motorsport - S62 Forged Piston Set

• Supertech - S52 Turbo Pistons (87mm)

• VAC - S62 High Performance Direct Replacement Piston Ring Set

• Wiseco - Forged Piston Kit, S14

• Wiseco - M10 Piston Kit

• Wiseco - M60 & M62 Piston Kit

• Wiseco Piston Kit S14 (2.5L Stroker) E30 M3