I am proud to say that we in fact do everything in house…nothing is outsourced.
Well, this is a quick tutorial. As everyone knows, the ring gear is welded to the carrier. We wanted to do the best job possible, so we configured our CNC lathes and mills to handle this challenging task. The end result is beautiful =)
VAC Performance Built Differentials are built to last with the highest quality components, procedures, and technical expertise in the industry. We have been building BMW differentials since the 1980s – 2002, E46, E92, street, race – we have done it.
How is a VAC Performance Built Differential made? (this is not a complete list, but most major operations are covered)
1. Photograph and inspect every differential for damage/missing parts etc.
2. Drain and inspect fluid looking for shavings or anything odd with the fluid.
3. Remove cover, inspect ring gear, confirm gear ratio. Pictured: The infamous welded ring gear. Note how it is actually welded to the carrier.
4. Test backlash before dissassembly.
5. Remove axle shafts, old side cover seals, snap rings.
6. Carefully remove the carrier.
7. Remove inner races from carrier.
8. Clean up the carrier, and prep for CNC operation.
9. Set up the carrier in our ultra rigid and precise CNC lathe. Pictured: Stock welded ring gear/carrier on one of our lathes.
10. Machine away weld that secures the ring gear to the carrier. This is an extremely robust weld.
11. Remove the resultant step (weld) so it is flat enough to machine. Pictured: stock ring gear separated from carrier.
12. Machine the ring gear flat (to ensure a precise mating surface for the new unit) Pictured: Separated ring gear | fully machined ring gear | drilled/tapped ring gear
13. Set up the newly finished ring gear on our CNC mill. Pictured: Machined ring gear on our HAAS 5 axis machine.
14. Machine the ring gear to make it compatible with the limited slip unit.
Pictured: Completed ring gear still in the HAAS mill.
After: Note how we machine the entire face, not just the area where the LSD bolts. Our machining method ensures ideal accuracy and reliability. Not sure that anyone takes it this far.
15. Assemble the limited slip unit.
16. Pressure wash and paint the housing.
17. Soda blast and clean the differential.
18. Install bearings/snap rings.
19. Check pattern, install seals, gasket material and differential cover. Pictured: Checking the pattern on the newly assembled differential.